Signals are transmitted by way of fiber-optic cables, so noise countermeasures are unnecessary. Also, connecting and disconnecting fiber-optic cables is simple and hassle-free.
Fiber-optic Cable Transmission Component is made up of optical transmission modules and cables equipped with connectors for fiber-optic transmission. It is an effective noise countermeasure for the signal transmission lines of any industrial system. Fiber-optic Cable Transmission Component can respond to various transmission distances and speeds, ranging from a nearby location at a speed (e.g. 50 m away at 150 Mbps).
Do you have problems with transmission line noise? We provide a variety of optical transmission components that can help.
If you require further technical or commercial support for our products please do not hesitate to contact Hitachi High-Technologies Corporation.
(Link to Hitachi High-Technologies Corporation. Global site)
These noise tolerant products can be used in a wide range of areas, including factory automation and office automation.
These noise tolerant products can be used in a wide range of areas, including factory automation and office automation. They can be connected to F06 and F07PN optical connectors.
DS9300/DR9300
DC9370/DC9510
DC9331
These cables are equipped with optical connectors used for POF optical transmitter, receiver and transceiver modules. The fiber materials are POF (980/1000) and HPCF (200/230).
CA8104AP-nM-A11
CA50PNAP-nM-A12 (for POF)
CA50PNPC-nM-A12 (for HPCF)
These noise tolerant transceivers are mainly used in factory automation.
These noise tolerant transceivers are mainly used in factory automation. They can be connected to F06 or F08 optical connectors.
DC9215S/DC9223
These cables are equipped with optical connectors for DC9 optical transceiver modules. The fiber materials are SGF (185/230) and MMF (50/125).
CA7103G/CA7003G
CA7103S
This relay adapter can be connected to optical connectors used for the DC9 series. (This can also be connected to F06 optical connectors used for the POF series.)
PA7003
Transmission Speed (Mbps) | Model Name | Connector | Fiber Material | Maximum Transmission Distance (*1) | |
---|---|---|---|---|---|
POF Series | DC up to 50 | For transmitter DS9300 | F06 | POF | 20m |
For receiver DR9300 |
|||||
DC9370 | F07PN | POF | 20m | ||
HPCF | 100m | ||||
10 to 125 | DC9331 | F07PN | POF | 20m | |
HPCF | 100m | ||||
45 to 150 | DC9510 | F07PN | POF | 20m | |
HPCF | 50m | ||||
DC9 Series | DC up to 10 | DC9215S | F06 / F08 | MMF | 2km |
DC up to 25 | DC9223 | F06 / F08 | SGF | 1km |
POF : plastic optical fiber (980/1000)
HPCF : hard polymer-clad optical fiber (200/230)
SGF : silica glass multi-mode optical fiber (185/230)
MMF : silica glass multi-mode optical fiber (50/125)
SMF : silica glass single-mode optical fiber (9/125)
The following is an example of using Fiber-optic Cable Transmission Component in a factory automation network.
If transmission among devices is easily influenced by noise outside the transmission lines, you can reduce the influence of noise by using fiber-optic cables.
Fiber-optic Cable Transmission Component can respond to various transmission distances and speeds, ranging from a nearby location at a speed (e.g. 50 m away at 150 Mbps).
If you require further technical or commercial support for our products please do not hesitate to contact Hitachi High-Technologies Corporation.
(Link to Hitachi High-Technologies Corporation. Global site)
Trademarks or Registered Trademarks